NEC iPASOLINK EX Advanced Instruction Manual page 338

Set ETH Function
4. Specify
Figure 8-19 Add VLAN ID Option Window (example: 802.1q)
Parameter
VLAN ID
S-VLAN ID
VLAN Service Name
ii) The VLAN ID entry field in the Filter option box indicates
iii) When registering multiple VLAN IDs,
iv) If (an) automatically generated VLAN Service Name(s) within the multiple
iPASOLINK EX Advanced: S
VLAN ID
(for 802.1q) or
Name
:
Table 8-5 Add VLAN ID Parameters
Value
1 to 4094
(text field)
NOTE: Multiple VLAN IDs can be entered using comma(s) and/or hyphen as
shown below:
VLAN ID:1,2,3,1000-4094
VLAN Service Name:
i) By the example above, VLAN IDs of 1, 2, 3, and 1000 to 4094, that is, 3098
IDs in total are registered. The order of entering IDs has no special rule, which
means that entering in the order of 1000-4094,1,3,2 is available as well.
which is only to limit the number of VLAN IDs to display in the beginning.
Entering a specific number or a range (
4094) retrieves VLAN IDs as entered. To display all, remove the entry to leave
the field blank, and click the Search button.
automatically added to each VLAN Service Name. The maximum number of
characters for a VLAN Service Name is 27.
VLAN IDs to be registered already exist(s), that/those VLAN ID(s) will be
registered without VLAN Service Name(s).
N S
ET ETWORK AND YSTEM
S-VLAN ID
Description
[For 802.1q] Enter VLAN ID.
[For 8021.ad] Enter S-VLAN ID.
Enter VLAN Service Name. Valid value is 1 to 32
characters long.
(VLAN Name)
e.g.
P
ROVISIONING
VLAN Service
(for 802.1ad) and
1–20
, for VLAN IDs 4000 to
4000–4094
( :
xxxx 0001
-xxxx
GGS-000547-01E
8-19
by default,
to ) is
4094