NEC iPASOLINK EX Advanced Instruction Manual page 189

3-44
5. Assign the appropriate value to each parameter:
Figure 3-52 FTP Setting Option Window
Parameter Value
FTP Always Enable
Enable
Disable
TCP Port 1 to 65535
(Command)
TCP Port 1 to 65535
(Data)
MAX Session 1 to 3
Auto Stop Enable
Disable
6. Click the
7.
Figure 3-53 Warning Dialog Box
GGS-000547-01E
Table 3-19 FTP Setting Parameters
Description
FTP is always in service.
Enable FTP service to open or to close on demand.
Disables FTP service.
Set TCP Port of FTP Server (for incoming
commands). [default: 21]
Set TCP Port of FTP Server (for outgoing
commands) [default: 20]
Specify the maximum number of user sessions at a
time. [default: 1]
Auto Stop disconnects a session automatically if no
operation is carried out for 90 seconds.
FTP Server will not disconnect a session whether or
not a session has an operation.
button when completed.
OK
Warning dialog box appears. Click the OK button to proceed.
iPASOLINK EX Advanced: S
SECURITY MANAGEMENT
Recommended
Value for PNMSj
Enable
(makes PNMSj
effective)
21
20
1
Enable
N S P
ET ETWORK AND YSTEM ROVISIONING