NEC iPASOLINK EX Advanced Instruction Manual page 72

ADJUST ANTENNA ANGLE
2. Adjust the antenna angle — Turn it up or down:
Figure 8-9 Turn Antenna Up or Down
3. Release the system from Maintenance mode using WebLCT.
4. Disconnect the Multimeter from RSL terminal.
5. Put the protective cap back in place on RSL terminal of each station. This
6. At each station, secure the Antenna by re-tightening bolts that have been
iPASOLINK EX Advanced: I
(1) Loosen bolts
(3) Tightening Torque: 38 Nm ±5%
(1) Loosen three bolts.
(2) Rotate the bolt to turn the antenna up and down.
(3) Adjust and specify parameters for control items using WebLCT at both
opposing sites.
(4) When the up/down angle is adjusted, secure the three bolts back in place
terminal must be covered by the protective cap for waterproofing.
loosen in Step 2.
NSTALLATION
8-7
(2) Rotate bolt
GGS-000546-01E