Table of Contents
Advertisement
Set ETH Function
Parameter
STP Mode:
Region Name
Revision No.
BPDU Guard Timer Usage
BPDU Guard Timer
IST tab
CIST Regional Root
Bridge Priority / ID
Bridge Priority
Member VLAN
Enable
Item
Port
Port Name /LAG Name
STP Port Path Cost
STP Port Path Cost
(Value)
STP Port Priority
Edge Port
BPDU Guard
Root Guard
iPASOLINK EX Advanced: S
Table 8-24 MSTP Port Setting Parameter (1 of 2)
Value
MSTP
(text field)
0 to 65535
Use
Not Use
10 to 1000000
(read only)
1 to 61440
(read only)
(check box)
(read only)
(read only)
(read only
Auto
Manual
1 to 200000000
0 to 240
Enable
Disable
Enable
Disable
Enable
Disable
N
S
P
ET
ETWORK AND
YSTEM
Description
Indicates MSTP.
Enter the Region Name. Valid value is 1 to 32
characters long.
Specify the Revision Number.
Select to use or not to use the BPDU. Selecting Use
enables BPDU Guard Timer option below.
Set BPDU Guard Timer. [unit: second]
Indicates the CIST Regional Root Bridge Priority and
ID of the selected port.
Select a Bridge Priority. [granularity: 4096]
Indicates the member VLAN IDs of the selected port.
Tick the check box to select the target object.
Shows the information.
Enables the function to automatically calculate the
path costs.
Selects to manually calculate and enter the path
costs.
This filed is enabled by setting STP Port Path Cost
to Manual. Enter the cost manually.
Specifies the STP Port Priority.
Sets the target port to Edge Port.
Removes the Edge Port setting from the target port.
Enables/Disables the BPDU Guard usage.
Enables/Disables the Root Guard usage.
ROVISIONING
8-97
GGS-000547-01E
Advertisement
Chapters
Table of Contents
