NEC iPASOLINK EX Advanced Instruction Manual page 482

Set ETH Function
4. Specify the parameters, then click the OK button.
Figure 8-224 Select Queue Profile Option Window
Parameter
Priority Queue
Profile
MAX Rate
MIN Rate
Scheduling Mode
DWRR Weight
5. Information dialog box appears. Click the OK button to proceed.
Figure 8-225 Information Dialog Box
iPASOLINK EX Advanced: S
Table 8-44 Number of Queue Setting Options
Value
(available profile #)
1 to 10000
0 to 10000
SP
DWRR
1 to 127
N S P
ET ETWORK AND YSTEM
Description
Select a Priority Queue Profile number to modify.
Enter the maximum bandwidths guaranteed rate.
[unit: Mbit/s; default: 1000]
Enter the minimum bandwidths guaranteed rate.
[unit: Mbit/s; default: 0]
Specifies Strict Priority (SP) for Scheduler setting, which gives
prior frame process to target Shaper than that of DWRR
specified Shaper Group. [default]
Specifies the Deficit Weighted Round Robin (DWRR) for
Scheduler setting. The frame process is carried out according
to the weight rate specified by the DWRR Weight value.
Selecting DWRR enables the DWRR Weight parameter on the
right.
Set the priority for DWRR Scheduling Mode. This parameter is
disabled when the Scheduling Mode selects SP.
ROVISIONING
8-163
GGS-000547-01E