NEC iPASOLINK EX Advanced Instruction Manual page 244

NETWORK MANAGEMENT
Figure 5-21 Bridge Setting Option Window
Parameter
Default Gateway
Bridge Usage
Bridge IP Address
Bridge Subnet Mask
Primary IP Address
NMS
MODEM
Management VLAN
Usage
Management VLAN ID
STP Auto Configuration
STP Usage
iPASOLINK EX Advanced: S
Table 5-5 Bridge Setting Parameters
Value
x.x.x.x
Used
Not Used
x.x.x.x
x.x.x.x
(check box)
(check box)
(check box)
Used
Not Used
(check box)
Auto
Manual
Used
Not Used
N S P
ET ETWORK AND YSTEM
Description
Enter the address of default gateway.
To enable the Bridge use, select
Enter the IP Address to assign.
Enter the subnet mask.
Tick a box to select a Bridge to assign the Primary IP Address.
Tick a box to select a port to be accommodate in the Bridge.
Set to use or not to use the Management VLAN. Selecting
Used enables the Management VLAN ID option below.
Enter the VLAN ID.
Select an option to configure STP automatically or manually.
Set to use or not to use the STP.
ROVISIONING
Used
.
GGS-000547-01E
5-17