Temperature; Total Fdb Full; Trap Suppression Status; Tx Modulation - NEC iPASOLINK EX Advanced Instruction Manual

CORRECTIVE MAINTENANCE

Temperature

This condition indicates that the temperature within equipment exceeds the
operational limitation.
Procedure 5-33
1.
2.

Total FDB Full

This condition is not an alarm. The message informs that the Dynamic Entry in L2
Switch has reached the maximum number.

Trap Suppression Status

This condition is not an alarm. The message indicates the state of Trap Suppression
function.

TX Modulation

This condition is not an alarm. The message informs that the modulation system of
MODEM at the transmitting side has been changed.
iPASOLINK EX Advanced: O
Check the room temperature, and adjust it.
Retrieve the
Current Status
NOTE: Wait at least for an hour in the adjusted air before checking the
Current Status
If the alarm is not cleared, contact NEC for the further maintenance support.
This step ends the procedure.
& M
PERATION AINTENANCE
, and check if the
.
alarm is cleared.
Temperature
GGS-000548-01E
5-45
Equipment
BB
MODEM
MODEM