Trouble Clearing; Overview; Making Contact With Nec; Objects And Their Condition Types - NEC iPASOLINK EX Advanced Instruction Manual

5-18

5.5 Trouble Clearing

5.5.1 Overview

Following are procedures to recover the equipment if it is in failure. Failed conditions
are issued to LED on the equipment and to the status information on WebLCT. Refer
to
for the indications.

5.5.2 Making Contact with NEC

For the technical assistance or information, contact your project contractor, or an
NEC supporting office.

5.5.3 Objects and Their Condition Types

Descriptions and procedures for the trouble clearing are organized in the alphabetic
order of indication messages. Alarm indication messages and their procedures to
clear the conditions are provided as the following:
INDICATION
ALS
AMBR Range Mismatch
ATPC Power Mode
CLK Drift
CLK FAIL
CLK Status Changed
Clock Class
Clock ID
Compression Setting Mismatch
Critical Event
Current Status
Dying Gasp
Early Warning
GGS-000548-01E
5.1 Equipment Conditions
Table 5-3 iPASOLINK EX/A Condition Types (1 of 4)
Severity
——
MJ
——
MN
MN
——
——
——
MJ
——
——
——
WR
, 5.2 View Current Status
Object
ETH
MODEM
MODEM
Equipment
Equipment
Equipment
Equipment
Equipment
MODEM
Equipment
Equipment
Equipment
MODEM
iPASOLINK EX Advanced: O
CORRECTIVE MAINTENANCE
and 5.3 Alarm Lights
Procedure
(Indicating the condition only.)
on Page 5-22
(Indicating the condition only.)
on Page 5-22
on Page 5-23
(Indicating the condition only.)
(Indicating the condition only.)
(Indicating the condition only.)
on Page 5-24
(Indicating the condition only.)
(Indicating the condition only.)
(Indicating the condition only.)
on Page 5-25
& M
PERATION AINTENANCE