Eth-Oam Mismerge - NEC iPASOLINK EX Advanced Instruction Manual

5-28
5.
6.
7.
8.

ETH-OAM Mismerge

This condition indicates that the received ETH-CC Frame matches to the MEP level,
but with an incorrect maintenance ID. This may be caused by receiving the
unexpected ETH-CC Frames from the far-end NE, or by the MEG/MEP
Configuration error in WebLCT.
Procedure 5-11
1.
2.
3.
4.
5.
GGS-000548-01E
Retrieve the
Current Status

This step ends the procedure.
YES:

Go to Step 6.
NO:
Check the MEG/MEP Configuration on the far-end site.
Is MEG/MEP Configuration on the far-end site appropriate?

Contact NEC.
YES:

Correct them, and go to Step
NO:
Retrieve the Current Status
the alarm is not cleared, contact NEC for the further maintenance support.
This step ends the procedure.
Check the MEG/MEP Configuration, and correct it if it has any error.
Retrieve the
Current Status
cleared.
Is the ETH-OAM Mismerge

This step ends the procedure.
YES:

Check the MEG/MEP Configuration of the far-end NE, and then go to
NO:
Step 4.
Is MEG/MEP Configuration on the far-end site appropriate?

Contact NEC.
YES:

NO: Correct them, and go to Step
Retrieve the
Current Status
cleared. If the alarm is not cleared, contact NEC for the further maintenance
support.
This step ends the procedure.
, and check if the
ETH-OAM LOC
8.
, and check if the ETH-OAM LOC
, and check if the
ETH-OAM Mismerge
alarm cleared?
5.
, and check if the
ETH-OAM Mismerge
iPASOLINK EX Advanced: O
CORRECTIVE MAINTENANCE
alarm is cleared.
alarm is cleared. If
alarm is
alarm is
& M
PERATION AINTENANCE
BB