Table of Contents
Advertisement
EQUIPMENT SETUP
Parameter
Reference Modulation
Radio Mode
ETH Bandwidth [Mbps]
TX RF Frequency [MHz]
RX RF Frequency [MHz]
Frame ID
TX Power Control
5. When completed, click the
6. Confirm that the fields of setup parameters change to blue, then click the
iPASOLINK EX Advanced: S
Table 4-2 Detailed MODEM Setting Parameters (2 of 2)
Value
QPSK
8PSK
16 QAM
32 QAM
64 QAM
128 QAM
256 QAM
High Capacity
High System Gain
(read only)
71125.00 to 73625.00
73375.00 to 75875.00
81125.00 to 83625.00
83375.00 to 85875.00
(read only)
1 to 32
MTPC
ATPC
Confirmation Screen
N
S
ET
ETWORK AND
YSTEM
Description
Select a reference modulation from the list. Available
Reference Modulation differs according to the channel
spacing to use.
This option is enabled depending on the obtained
Software License.
NOTE: Refer to 2.2.1 Radio Functions in
Specification manual for the information regarding
the combinations of Channel Spacing and Reference
Modulations.
High System Gain can be selected when Channel
Spacing is set to 750MHz.
Indicates the Ethernet bandwidth value that is
automatically calculated.
Values for Sub-Band A, Lower Band.
Values for Sub-Band B, Lower Band.
Values for Sub-Band A, Higher Band.
Values for Sub-Band B, Higher Band.
Indicates the incoming radio frequency value.
Set the Frame ID.
Manual Transmitter Power Control [manual control]
Automatic Transmitter Power Control [automatic control]
button.
Next
Radio Configuration >> Step2 Setting
window appears.
P
ROVISIONING
4-7
button.
OK
GGS-000547-01E
Advertisement
Chapters
Table of Contents
