NEC iPASOLINK EX Advanced Instruction Manual page 319

7-10/END
Parameter
ATPC Power Mode
NOTE: When the MTPC Mode is selected, ATPC Power Mode option is disabled.
5. When completed, click the
6. Click the
Figure 7-16 Information Dialog Box
7. The
Figure 7-17 ALM Mode Setting Window
GGS-000547-01E
Table 7-4 ALM Mode Setting Parameters
Value
MAX
MIN
Hold
OK
button to proceed.
ALM Mode Setting
parameters.
This step ends the procedure.
Description
Increases the TX Power to the maximum value.
Decreases the TX Power to the minimum value.
Holds the TX Power at the current value.
OK Information
button.
window updates the information. Verify the displayed
iPASOLINK EX Advanced: S
Set MODEM Function
dialog box appears.
N S P
ET ETWORK AND YSTEM ROVISIONING