NEC iPASOLINK EX Advanced Instruction Manual page 260

NETWORK MANAGEMENT
4. Specify the filter condition, then click the
Figure 5-49 Input Filter Entry (Modify) Option Window
Parameter
Entry No.
Input Index
Source IP Address
Source Subnet Mask
Protocol
Destination Port
Action
iPASOLINK EX Advanced: S
Table 5-10 Input Filter Entry (Modify) Parameters
Value
(read only)
Any
Bridge01 to Bridge06
x.x.x.x
x.x.x.x
Any
ICMP
TCP
UDP
Other
Any (check box)
1 to 65535
Permit
Deny
N S P
ET ETWORK AND YSTEM
OK
Description
Indicates the selected Entry No.
Selects the ingress port.
Specify the source IP Address of the incoming packets.
Specify the Subnet Mask of the source IP Address of the
incoming packets.
Selects no specific Protocol.
Selects Internet Control Message Protocol.
Selects TCP/IP Protocol. Selecting this option enables
the Destination Port option.
Selects User Datagram Protocol. Selecting this option
enables the Destination Port option.
Selecting Other enables the field below to set the Port
Numbers.

Check (leave a tick in the check box) to set no specific
port for the destination.

Uncheck (remove a tick from the check box) to specify
the destination port.
Select a port for the destination.
Allows the packets that meet the specified conditions.
Discards the packets that meet the specified conditions.
ROVISIONING
button.
GGS-000547-01E
5-33