Description; Smmemfull-Report Message Storage Media Being Full; Command Syntax; Defined Values - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
Command
+CMSS=?

6.20.2 Description

The SET command sends message with location value <index> from preferred
message storage <mem2> to the network (SMS-SUBMIT or SMS-COMMAND). If
new recipient address <da> is given for SMS-SUBMIT, it shall be used instead of the
one stored with the message. Reference value <mr> is returned to the TE on
successful message delivery. Optionally (when +CSMS <service> value is 1 and
network supports) <scts> is returned. Values can be used to identify message upon
unsolicited delivery status report result code. If sending fails in a network or an ME
error, final result code +CMS ERROR: <err> is returned. See chapter Message
Service Failure Result Code for a list of <err> values. This command should be
aborted.
6.21 ^SMMEMFULL–Report Message Storage Media
Being Full

6.21.1 Command Syntax

Command
6.21.2 Description
When the message storage media overflow, the event will be reported automatically.

6.21.3 Defined Values

<mem_type>: string value. It indicates the type of the overflowing media.
"SM": Which means the (U)SIM card.
"ME": Which means NV.
Issue 04 (2013-01-28)
Possible response(s)
<CR><LF>OK<CR><LF>
Possible response(s)
<CR><LF>^SMMEMFULL:<mem_type><CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Short Message Service Commands
103