Examples; Cgeqreq-3G Quality Of Service Profile (Requested); Command Syntax - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification

8.2.4 Examples

AT+CGQREQ=?
+CGQREQ: "IP",(0-3),(0-4),(0-5),(0-9),(0-18,31)
+CGQREQ: "PPP",(0-3),(0-4),(0-5),(0-9),(0-18,31)
OK
AT+CGQREQ?
+CGQREQ:
OK
AT+CGQREQ=1,0,0,0,0,0
OK
AT+CGQREQ?
+CGQREQ: 1,0,0,0,0,0
OK
8.3 +CGEQREQ–3G Quality of Service Profile (Requested)

8.3.1 Command Syntax

Command
+CGEQREQ=[<cid>[,<Traffic
class>[,<Maximum bitrate
UL>[,<Maximum bitrate
DL>[,<Guaranteed bitrate
UL>[,<Guaranteed bitrate
DL>[,<Delivery
order>[,<Maximum SDU
size>[,<SDU error
ratio>[,<Residual bit error
ratio>[,<Delivery of erroneous
SDUs>[,<Transfer
delay>[,<Traffic handling
priority>]]]]]]]]]]]]]
+CGEQREQ?
Issue 04 (2013-01-28)
Possible Response(s)
<CR><LF>OK<CR><LF>
In case of error:
<CR><LF>ERROR<CR><LF>
<CR><LF>+CGEQREQ: <cid>,<Traffic
class>,<Maximum bitrate UL>,<Maximum bitrate
DL>,<Guaranteed bitrate UL>,<Guaranteed
bitrate DL>,<Delivery order>,<Maximum SDU
size>,<SDU error ratio>,<Residual bit error
ratio>,<Delivery of erroneous SDUs>,<Transfer
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GPRS Service Commands
117