Description - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
Command
+CGEQREQ=?

8.3.2 Description

This command allows the TE to specify a UMTS Quality of Service Profile that is used
when the MT sends an Activate PDP Context Request message to the network.
The SET command specifies a profile for the context identified by the (local) context
identification parameter, <cid>. The specified profile will be stored in the MT and sent
to the network only at activation. Since this is the same parameter that is used in the
+CGDCONT, the +CGEQREQ command is effectively an extension to this command.
The QoS profile consists of a number of parameters, each of which may be set to a
separate value.
Issue 04 (2013-01-28)
Possible Response(s)
delay>,<Traffic handling priority>
<CR><LF>+CGEQREQ: <cid>,<Traffic
class>,<Maximum bitrate UL>,<Maximum bitrate
DL>,<Guaranteed bitrate UL>,<Guaranteed
bitrate DL>,<Delivery order>,<Maximum SDU
size>,<SDU error ratio>,<Residual bit error
ratio>,<Delivery of erroneous SDUs>,<Transfer
delay>,<Traffic handling priority>
...<CR><LF><CR><LF>OK<CR><LF>
<CR><LF>+CGEQREQ: <PDP_type>,(list of
supported <Traffic class>s),(list of supported
<Maximum bitrate UL>s),(list of supported
<Maximum bitrate DL>s),(list of supported
<Guaranteed bitrate UL>s),(list of supported
<Guaranteed bitrate DL>s),(list of supported
<Delivery order>s),(list of supported <Maximum
SDU size>s),(list of supported <SDU error
ratio>s),(list of supported <Residual bit error
ratio>s),(list of supported <Delivery of erroneous
SDUs>s),(list of supported <Transfer
delay>s),(list of supported <Traffic handling
priority>s)
[<CR><LF>+CGEQREQ: <PDP_type>,(list of
supported <Traffic class>s),(list of supported
<Maximum bitrate UL>s),(list of supported
<Maximum bitrate DL>s),(list of supported
<Guaranteed bitrate UL>s),(list of supported
<Guaranteed bitrate DL>s),(list of supported
<Delivery order>s),(list of supported <Maximum
SDU size>s),(list of supported <SDU error
ratio>s),(list of supported <Residual bit error
ratio>s),(list of supported <Delivery of erroneous
SDUs>s),(list of supported <Transfer
delay>s),(list of supported <Traffic handling
priority>s))
[...]]<CR><LF><CR><LF>OK<CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GPRS Service Commands
118