Defined Values - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification

8.4.3 Defined Values

<cid>: a numeric parameter which specifies a particular PDP context definition (see
+CGDCONT commands), the value range is 1 to 16.
<Traffic class>: a numeric parameter that indicates the type of application for which
the UMTS bearer service is optimized.
0: Conversational
1: Streaming
2: Interactive
3: Background
Other values are reserved.
<Maximum bitrate UL>: a numeric parameter that indicates the maximum number of
Kbits/s delivered to UMTS (up-link traffic) at a SAP. As an example a bitrate of 32kbit/s
would be specified as '32' (e.g. +CGEQNEG:...,32, ...).
<Maximum bitrate DL>: a numeric parameter that indicates the maximum number of
Kbits/s delivered by UMTS (down-link traffic) at a SAP As an example a bitrate of
32kbit/s would be specified as '32' (e.g. +CGEQNEG:...,32, ...).
<Guaranteed bitrate UL>: a numeric parameter that indicates the guaranteed number
of Kbits/s delivered to UMTS (up-link traffic) at a SAP (provided that there is data to
deliver). As an example a bit rate of 32kbit/s would be specified as '32' (e.g.
+CGEQNEG:..., 32, ...).
<Guaranteed bitrate DL>: a numeric parameter that indicates the guaranteed number
of kbits/s delivered by UMTS (down-link traffic) at a SAP (provided that there is data to
deliver). As an example a bit rate of 32kbit/s would be specified as "32" (e.g.
+CGEQNEG:...,32, ...).
<Delivery order>: a numeric parameter that indicates whether the UMTS bearer shall
provide in-sequence SDU delivery or not.
0: No
1: Yes
Other values are reserved.
<Maximum SDU size>: a numeric parameter that (1, 2, 3,...) indicates the maximum
allowed SDU size in octets
<SDU error ratio>: a string parameter that indicates the target value for the fraction of
SDUs lost or detected as erroneous. SDU error ratio is defined only for conforming
traffic. The value is specified as 'mEe'. As an example a target SDU error ratio of
5•10
<Residual bit error ratio>: a string parameter that indicates the target value for the
undetected bit error ratio in the delivered SDUs. If no error detection is requested,
Residual bit error ratio indicates the bit error ratio in the delivered SDUs. The value is
specified as 'mEe'. As an example a target residual bit error ratio of 5•10
specified as '5E3' (e.g. +CGEQNEG:...,"5E3",...).
<Delivery of erroneous SDUs>: a numeric parameter that indicates whether SDUs
detected as erroneous shall be delivered or not.
Issue 04 (2013-01-28)
-3
would be specified as '5E3' (e.g. +CGEQNEG:...,"5E3",...).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GPRS Service Commands
-3
would be
124