Defined Values; Srvst-Indicate Service State Change; Command Syntax; Description - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification

13.3.3 Defined Values

<uiPercent>: the grid of the signal.
0–5: Indicate the signal intensity, definition as below
0: RSCP ≤ –109 dBm
1: –109 dBm < RSCP ≤–97 dBm
2: –97 dBm < RSCP ≤–85 dBm
3: –85 dBm < RSCP ≤–73 dBm
4: –73 dBm < RSCP ≤–61 dBm
5: RSCP > –61 dBm
13.4 ^SRVST–Indicate Service State Change

13.4.1 Command Syntax

Command

13.4.2 Description

When the service state changes, the MS will report the new service state to the TE.
In sleep mode, unsolicited reports will be ignored, since the ports are closed.
13.4.3 Defined Values
<srv_status>: system service state. The values are as follows:
0: No service
1: Restricted service
2: Valid service
3: Restricted regional service
4: Power-saving and deep sleep state
Issue 04 (2013-01-28)
Possible response(s)
<CR><LF>^SRVST:<srv_status><CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status Control Commands
175