Resetcnt-Query Reset Counter; Command Syntax; Description; Defined Values - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
0: Not supported
1: Roaming is supported (default value)
2: No change
<srvdomain>: domain setting
0: CS_ONLY
1: PS_ONLY
2: CS_PS (default value)
4: No change
Notes:
13.8 ^RESETCNT–Query Reset Counter

13.8.1 Command Syntax

Command
^RESETCNT
^RESETCNT=<clear_flag>

13.8.2 Description

This command used to query the times of resetting which caused by
POWER_ON_OFF pin or at command etc.

13.8.3 Defined Values

<pwroff_rst>: times of resetting which caused by POWER_ON_OFF pin.
<at_rst>: times of resetting which caused by at command, such as ^RESET.
<dog_rst>: times of resetting which caused by watchdog timer expired.
<clear_flag>: this value only can be 0. It is used to clear the record of resetting times.
Issue 04 (2013-01-28)
 Module cannot register NW if the <band> value not support.
 The <band>s that module supports please refer to module‟s Release Notes.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Possible response(s)
<CR><LF>^RESETCNT:<pwroff_rst>,<at_rst>,<dog
_rst><CR><LF>OK<CR><LF>
In case of MS-related error:
<CR><LF>ERROR<CR><LF>
<CR><LF>OK<CR><LF>
<CR><LF>ERROR<CR><LF>
Status Control Commands
180