Examples; Syscfg-Set System Configuration Reference; Command Syntax - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
<sys_submode>: system sub mode, the values are as follows:
0: No service
1: GSM mode
2: GPRS mode
3: EDGE mode
4: WCDMA mode
5: HSDPA mode
Note:

13.6.4 Examples

AT^SYSINFO
^SYSINFO:2,1,0,3,1,,2
OK
13.7 ^SYSCFG–Set System Configuration Reference

13.7.1 Command Syntax

Command
^SYSCFG=<mode>,<acqorder>,<
band>,<roam>,<srvdomain>
^SYSCFG?
^SYSCFG=?
Issue 04 (2013-01-28)
In 2G network sys_submode indicates the capability of the current cell.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status Control Commands
Possible response(s)
<CR><LF>OK<CR><LF>
In case of error:
<CR><LF>ERROR<CR><LF>
<CR><LF>^SYSCFG:<mode>,<acqorder>,<b
and>,<roam>,<srvdomain><CR><LF>
<CR><LF>OK<CR><LF>
<CR><LF>^SYSCFG:(list of supported
<mode>s),
(list of supported <acqorder>s),
(list of supported(<band>,<band_name>)s),
(list of supported <roam>s),
(list of supported <srvdomain>s)<CR><LF>
<CR><LF>OK<CR><LF>
178