Wkmode-Switch Between Wakeup_Out Pin Voltage Level Modes; Command Syntax; Description; Defined Values - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
3.25 ^WKMODE–Switch Between WAKEUP_OUT Pin
Voltage Level Modes

3.25.1 Command Syntax

Command
^WKMODE=<wakeup_type>
^WKMODE=?
^WKMODE?

3.25.2 Description

This command is used to set switch WAKEUP_OUT pin between voltage level modes.
The SET command is used to set the voltage level mode for the WAKEUP_OUT pin.
The READ command is used to query the current voltage level mode of the
WAKEUP_OUT pin.
The TEST command is used to return the voltage level modes supported by the
WAKEUP_OUT pin.

3.25.3 Defined Values

<wakeup_type>: specifies the voltage level mode for the WAKEUP_OUT pin. The
settings take effect immediately. The available values are:
0: The voltage level of the WAKEUP_OUT pin is used to set the sleep mode. If the
voltage level is pulled up high, the module is woken up. If the voltage level is pulled
down low, the module is placed in sleep mode.
1: The voltage level of the WAKEUP_OUT pin is pulled up for 1 second when a call or
text message comes in. The WAKEUP_OUT pin remains at low level during other
time periods.
The default value is 1.

3.25.4 Implementation

Huawei proprietary interface
Optional
Issue 04 (2013-01-28)
Possible Response(s)
<CR><LF>OK<CR><LF>
In case of an MT-related error:
<CR><LF>ERROR<CR><LF>
<CR><LF>^WKMODE: (list of supported
<wakeup_type>s)<CR><LF><CR><LF>OK<CR><
LF>
<CR><LF>^WKMODE: <wakeup_type>
<CR><LF><CR><LF>OK<CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Configuration Commands
48