HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
8.4 +CGEQNEG–Request 3G Quality of Service Profile
(Negotiated)
8.4.1 Command Syntax
Command
+CGEQNEG=<cid>[,<cid>[,...]] <CR><LF>+CGEQNEG: <cid>,<Traffic
+CGEQNEG=?
8.4.2 Description
This command allows the TE to retrieve the negotiated QoS profiles returned in the
Activate PDP Context Accept message.
The SET command returns the negotiated QoS profile for the specified context
identifiers, <cid>s. The QoS profile consists of a number of parameters, each of which
may have a separate value.
The TEST command returns a list of <cid>s associated with active contexts.
Note:
Issue 04 (2013-01-28)
The SET command can only be used when the connection has been set up.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Possible Response(s)
class>,<Maximum bitrate UL>,<Maximum bitrate
DL>,<Guaranteed bitrate UL>,<Guaranteed
bitrate DL>,<Delivery order>,<Maximum SDU
size>,<SDU error ratio>,<Residual bit error
ratio>,<Delivery of erroneous SDUs>,<Transfer
delay>,<Traffic handling priority><CR><LF>
[<CR><LF>+CGEQNEG: <cid>,<Traffic
class>,<Maximum bitrate UL>,<Maximum bitrate
DL>,<Guaranteed bitrate UL>,<Guaranteed
bitrate DL> ,<Delivery order>,<Maximum SDU
size>,<SDU error ratio>,<Residual bit error
ratio>,<Delivery of erroneous SDUs>,<Transfer
delay>,<Traffic handling priority><CR><LF>
[...]]
<CR><LF>OK<CR><LF>
In case of error:
<CR><LF>+CME ERROR:<err><CR><LF>
If the connection has not been set up:
<CR><LF>OK<CR><LF>
If the connection has been set up;
<CR><LF>+CGEQNEG: (list of <cid>s
associated with active contexts)<CR><LF>
<CR><LF>OK<CR><LF>
GPRS Service Commands
123