Defined Values; Cops-Select Operator; Command Syntax - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification

14.2.3 Defined Values

<n>:
0: Disable proactive reporting of "CGREG" (default value)
1: Enable proactive reporting of "+CGREG: <stat>"
2: Enable proactive reporting of "+CGREG: <stat>[,<lac>,<ci>]"
<stat>:
0: Not registered. The MS is not searching the new operators to be registered.
1: Local network is registered (default value)
2: Not registered. But the MS is searching the new operators to be registered.
3: Registration rejected
4: Unknown reasons
5: Roaming network is registered
<lac>: position code information, composed of four characters and expressed in
hexadecimal. (Example: "00C3"= "195" in decimal).
<ci>: cell information, composed of four characters and expressed in hexadecimal.
(Extended Information: according to 3GPP Rel7, four characters are requested, but if
before Rel7, for example the currently network is Rel6 mostly, only the last two
characters is valid, the other characters is invalid and should be ignored. For example,
if the <ci> return 3B3DE1C, only DE1C is valid and could be used as DE1C is the last
two characters.)
14.3 +COPS–Select Operator

14.3.1 Command Syntax

Command
+COPS[=<mode>[,<format>
[,<oper>[,<rat>]]]]
+COPS?
Issue 04 (2013-01-28)
Possible response(s)
<CR><LF>OK<CR><LF>
In case of MS-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
<CR><LF>+COPS:
<mode>[,<format>,<oper>[,<rat>]]<CR><LF>
<CR><LF>OK<CR><LF>
In case of MS-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Network Service Commands
184