W-Store User Settings; Command Syntax; Description - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
3.9 &W–Store User Settings

3.9.1 Command Syntax

Command
&W

3.9.2 Description

The SET command stores some user settings to the profile, which can be resumed by
ATZ command.
The commands and parameters which can be stored are as follows:
Table 3-3 The commands and parameters which can be stored
Command
E
V
Q
&C
&D
&S
+IPR
+IFC
+ICF
S0
Issue 04 (2013-01-28)
Possible response(s)
<CR><LF>OK<CR><LF>
In case of MS-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
Parameter
<value>
<value>
<value>
<value>
<value>
<value>
<rate>
<DCE_by_DTE>,<DTE_by_DCE>
<format>,<parity>
<value>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Configuration Commands
32