Description; Defined Values; Z-Resume User Settings; Command Syntax - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification

3.7.2 Description

This command sets whether or not the TA transmits result code to the TE.

3.7.3 Defined Values

<value>:
0: DCE transmits result code (default value).
1: Result codes are suppressed and not transmitted.
Note:
3.8 Z–Resume User Settings

3.8.1 Command Syntax

Command
Z
3.8.2 Description
The SET command resumes the user settings which are stored by AT&W command.
The commands and parameters which can be resumed are as follows:
Table 3-2 The commands and parameters which can be resumed
Command
E
V
Q
&C
&D
&S
+IFC
S0
Issue 04 (2013-01-28)
ATQ will set value to 0.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Possible response(s)
<CR><LF>OK<CR><LF>
In case of MS-related error:
<CR><LF>ERROR<CR><LF>
Parameter
<value>
<value>
<value>
<value>
<value>
<value>
<DCE_by_DTE>,<DTE_by_DCE>
<value>
Configuration Commands
31