Phonebook Commands; Cpbs-Select Phonebook Memory; Command Syntax; Description - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
12.1 +CPBS–Select Phonebook Memory

12.1.1 Command Syntax

Command
+CPBS=<storage>
[,<reserved>]
+CPBS?
+CPBS=?

12.1.2 Description

The SET command is used to select a phonebook memory. The initial value after
restarting the MS is "SM". Other phonebook-related commands will be operated by
using the memory selected via this command.
The READ command returns the currently selected phonebook memory. Optionally,
the number of entries in use and the maximum number of entries should also be
returned.
The TEST command returns the supported phonebook memory types.

12.1.3 Defined Values

<storage>: phonebook memory type. Currently, only "SM" and "ON" are supported.
Issue 04 (2013-01-28)
12

Phonebook Commands

Possible response(s)
<CR><LF>OK<CR><LF>
In case of MS-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
<CR><LF>+CPBS: <storage>,<used>,<total><CR><LF>
<CR><LF>OK<CR><LF>
In case of MS-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
<CR><LF>+CPBS: (list of supported <storage>s)
<CR><LF>
<CR><LF>OK<CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Phonebook Commands
165