Mode-Indicate System Mode Change Event; Command Syntax; Description; Defined Values - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
13.5 ^MODE–Indicate System Mode Change Event

13.5.1 Command Syntax

Command

13.5.2 Description

When the system mode or sub-mode changes, the MS will report this indication to the
TE.
In sleep mode, unsolicited reports will be ignored, since the ports are closed.

13.5.3 Defined Values

<sys_mode>: system mode. The values are as follows:
0: No service
3: GSM/GPRS mode
5: WCDMA mode
<sys_submode>: system sub mode. The values are as follows:
0: No service
1: GSM mode
2: GPRS mode
3: EDGE mode
4: WCDMA mode
5: HSDPA mode
13.6 ^SYSINFO–Query System Information
13.6.1 Command Syntax
Command
^SYSINFO
Issue 04 (2013-01-28)
Possible response(s)
<CR><LF>^MODE:<sys_mode>,<sys_submode><CR><LF>
Possible response(s)
<CR><LF>^SYSINFO:<srv_status>,<srv_domain>,<roam_status
>,<sys_mode>,<sim_state>
[,<lock_state>,<sys_submode>]<CR><LF>
<CR><LF>OK<CR><LF>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status Control Commands
176