Clspwm-Write Or Delete Password; Command Syntax; Description; Defined Values - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification
Resetting the module will reset the value to default value.
3.23 ^CLSPWM–Write Or Delete Password

3.23.1 Command Syntax

Command
^CLSPWM=<passwo
rd>[,<newpassword>]

3.23.2 Description

The SET command is used to set and verify the password, <password> and
<newpassword> must be added quotation marks, otherwise return ERROR.
<password> is the current password, <newpassword> is new password to be set.




3.23.3 Defined Values

<password>, <newpassword>: string type, and the length is between 8 and 32. Legal
characters include „0‟–„9‟ and English characters, a–z or A–Z, and there is case
sensitive.

3.23.4 Implementation

When modify the password, the password is incorrect, +CME ERROR: incorrect
password (+CME ERROR: 16) are returned.
Issue 04 (2013-01-28)
Possible response(s)
<CR><LF>OK<CR><LF>
In case of MT-related error:
<CR><LF>+CME ERROR: <err><CR><LF>
If the password has not been set yet, and there is only <password> in the
command, which is used to set password.
If the password has been set, there are two parameters in the command, If
<newpassword> quotation marks, delete the current password, otherwise modify
current password.
If there is only <password> field, this command is used to check the password.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Configuration Commands
45