Examples; Reset-Delay The Module Reset Function; Command Syntax; Description - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification

3.17.4 Examples

AT^HS=0,0
^HS: 46500001,0,0,0,6
OK
3.18 ^RESET–Delay the Module Reset Function

3.18.1 Command Syntax

Command
^RESET[=<delay_time>]
^RESET?
^RESET=?

3.18.2 Description

This command is used to delay the module reset by user.

3.18.3 Defined Values

<delay_time>: delay time.
0: Module reset immediately.
1–65535: Delay time, indicates in second.
Notes:
Issue 04 (2013-01-28)
"AT^RESET" has same function with "AT^RESET=0";

Delay time out and start to reset. But the reset action would spend some time to complete.

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Possible response(s)
<CR><LF>OK<CR><LF>
<CR><LF>^RESET:<delay_time><CR><LF>
<CR><LF>OK<CR><LF>
<CR><LF>^RESET:(list of supported
<delay_time>s)<CR><LF><CR><LF>OK<CR><LF>
Configuration Commands
41