Description; Defined Values - Huawei MU509 At Command Interface Specification

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification

13.6.2 Description

This command is used to query the current system information, e.g. system service
state, domain, roaming or not.

13.6.3 Defined Values

<srv_status>: system service state. The values are as follows:
0: No service
1: Restricted service
2: Valid service
3: Restricted regional service
4: Power-saving and deep sleep state
<srv_domain>: system service domain. The values are as follows:
0: No service
1: Only CS service
2: Only PS service
3: PS+CS service
4: CS and PS not registered, searching
<roam_status>: roaming status. The values are as follows:
0: Non roaming state
1: Roaming state
<sys_mode>: system mode. The values are as follows:
0: No service
1: AMPS mode (not in use currently)
2: CDMA mode (not in use currently)
3: GSM/GPRS mode
5: WCDMA mode
<sim_state>: SIM card state. The values are as follows:
0: Invalid USIM card state or pin code locked
1: Valid USIM card state
2: USIM is invalid in case of CS
3: USIM is invalid in case of PS
4: USIM is invalid in case of either CS or PS
255: USIM card is not existent
<lock_state>: simlock state (reserved, not supported currently)
Issue 04 (2013-01-28)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status Control Commands
177