Displaying Faults And Alarms - Siemens SINAMICS S120 Function Manual

Basic functions
7.30 Web server
7.30.8.2

Displaying faults and alarms

You can display and acknowledge pending drive alarms and faults with the aid of the Web
server.
Displaying alarm messages
1. Click the "Events" entry in the navigation.
2. Click the "Alarm display" tab.
The current faults and alarms of the drive object are then displayed on the "Alarm display"
tab.
Figure 7-36
The following information is displayed:
The list of alarms and faults is updated automatically. The display can be limited to
selected entries in the columns "Type" and "Drive object" using a filter.
3. Click on the "Reset alarms" button.
The faults are acknowledged. The display of the "Alarm display" tab is updated.
450
Displaying alarm messages
Column Explanation
Time Time of the event
Type Type of the event
Drive object Relevant drive object
Alarm Alarm ID (alarm value) with description
Component Number of the relevant component
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
Drive functions