Function Diagrams And Parameters - Siemens SINAMICS S120 Function Manual

8.8.4.1

Function diagrams and parameters

Function diagrams (see SINAMICS S120/S150 List Manual)
• 3612
• 3614
Overview of important parameters (see SINAMICS S120/S150 List Manual)
• p0494[0...n]
• p0495
• p2596
• p2597
• p2598[0...3]
• p2599
• p2600
Parameter p0494 corresponds to parameter p0495 regarding its significance. In addition,
1)
parameter p0494 is dependent on an encoder data set; for example which can be used for
the data set switchover for interchangeable machining heads.
Drive functions
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
EPOS - referencing / reference point approach mode (r0108.4 = 1)
(p2597 = 0 signal)
EPOS - flying referencing mode (r0108.4 = 1)
(p2597 = 1 signal)
Equivalent zero mark, input terminal
Equivalent zero mark, input terminal
BI: EPOS set reference point
BI: EPOS referencing type selection
CI: EPOS reference point coordinate, signal source
CO: EPOS reference point coordinate value
EPOS reference point approach, reference point offset
Function modules
8.8 Basic positioner
1)
1)
527