Peripheral Checks - GE LOGIQ P6 Service Manual

GE H
EALTHCARE
D 5245279, R
IRECTION EVISION
Section 4-5Peripheral Checks
Check that peripherals work as described below:
Table 4-6
Step
1.
Press (FREEZE)
2.
Press (P1) or (P2) on the Keyboard
3.
Press RECORD on the Keyboard.
4.
Press COUNTER RESET on the screen.
5.
Press SEARCH on the screen.
6.
Enter the counter number in the counter field Number appears
7.
Press SET COUNTER to save the change.
Press SEARCH COUNTER to search the
8.
counter.
9.
Press REC icon on the screen
10..
Press VIDEO SOURCE on the screen.
11..
Press STOP icon on the screen
12.
Press PLAY icon on the screen.
Use the Assignable keys on the Control
13..
Panel
While in playback mode, use the SEARCH
14.
SPEED to adjust the video playback speed
and scroll through the record.
15.
Press MIC ON/OFF
3

Peripheral Checks

Task to do
Section 4-4 - Software Configuration Checks
LOGIQ™ P6/P6 P
Expected Result(s)
To stop image acquisition.
The image displayed on the screen is printed on B&W or Color printer,
depending on the key assignment configuration
To start the video counter at a different point:
To reset the counter
The Video Set Counter / Search Dialog window is displayed
Number is saved
To search VCR tapes exam by counter value.
To Start Recording
A red dot is displayed in the VCR status area on the Title bar to indicate
that recording has begun
To return to the scanning mode
To Stop recording
The video status icon is changed to (Stop)
To play back the tape
to perform actions on the recorded session, such as stop, pause, rewind
or fast forward.
The video status icon in updated accordingly.
To search on the tape
to turn the microphone on/off
S M
RO ERVICE ANUAL
4 - 21