Nest Fan Function Validation Procedure; Transbox/ Fan Function Validation Procedure - GE LOGIQ P6 Service Manual

GE H
EALTHCARE
D 5245279, R
IRECTION EVISION
4-9-9

Nest fan Function Validation Procedure

1.) After replace Nest fan assy, turn on the system. Refer to the
11.
2.) Confirm the fan rotating with naked eye and check the fan operating by rotating sound. No strange
sound should be heard.
NOTE: Do not close the right EMI bracket and right plastic cover before check the fan operation.
4-9-10

Transbox/ Fan Function Validation Procedure

1.) After replace Transbox fan assy, turn on the system. Refer to the
page
2.) Confirm the fan rotating by feeling wind. Refer to the figure below.
NOTE: Remove right side dusty filter and check the fan operation.
3
Figure 4-45 Checking Nest fan rotating
3-11.
Figure 4-46 Checking Transbox fan rotating
Section 4-9 - Board Function Checks
LOGIQ™ P6/P6 P S
RO ERVICE
3-5-1 "Power On/Boot Up" on page 3-
3-5-1 "Power On/Boot Up" on
M
ANUAL
4 - 45