Backup And Restore Database, Preset Configurations And Images - GE LOGIQ P6 Service Manual

Hide thumbs Also See for LOGIQ P6:

Table of Contents

Backup and Restore Database, Preset Configurations and Images

When upgrading from R1.0.X to R2.0.X, preset cannot be transferred.

Formatting Media

1.) To format the backup media, CD-R or DVD-R, select the UTILITY key on the Front Panel.

2.) Select CONNECTIVITY, then RERNOVABLE MEDIA. Properly label and Insert the backup

3.) Select the media type from the drop down menu.

4.) Enter the label for the media as shown in Figure 4-13. It is best to use all capital letters with no

5.) The Ultrasound system displays a pop-up menu, as shown in Figure 4-14. When the formatting

6.) If desired, verify that the format was successful by returning to

spaces or punctuation marks.

Figure 4-13 Format and Verify Media

has been completed, press OK to continue.

Utility>Connectivity>Rernovable Media and selecting VERIFY as shown in Figure 4-11.

Figure 4-14 Format Successful Pop-up Menu

Section 4-3 - General Procedure

LOGIQ™ P6/P6 P

Verify Format

Table of Contents