GE LOGIQ P6 Service Manual page 375

GE H
EALTHCARE
D 5245279, R
IRECTION EVISION
8-7-1 Flexible LCD Arm installation Procedure
8-7-1-1 Tools
• Common pilIips screwdrivers
• Allen/Unbraco wrench
• Stubby screwdriver (Flat tip and Cross tip)
8-7-1-2 Preparations
• Shut down the system and switch off the main breaker.
• Maneuver control console to a suitable position for removing the monitor.
8-7-1-3 Removal procedure
1.) Remove the LCD cable cover. Refer to the figure below.
2.) Unscrew 1 screw (2306565, BH M4x16 WHT) to remove the power cord bracket assembled under
the LCD cable cover. Refer to the figure below.
3
Figure 8-231 Removing the LCD cable cover
Figure 8-232 Removing the power cord bracket
Section 8-7 - Mechanical Option Installation instruction
LOGIQ™ P6/P6 P S
RO ERVICE
M
ANUAL
8 - 155