GE LOGIQ P6 Service Manual page 327

GE H
EALTHCARE
D 5245279, R
IRECTION EVISION
8-3-5-2 Image Management Guide (cont'd)
3.) The [From] combo box is not active. It displays Local Archive. The [To] combo box is active.
4.) In the patient list at the top of the Patient menu, select the patient(s) you want to export. You
NOTE: You need to use your best judgment when moving patients' images. If there are lots of images
or loops, then only move a few patients at a time.
5.) Once you have selected all of the patients to export, press Transfer Button as shown in Figure
3
Select the type of removable media CD/DVD. Then please wait until the patient list is visible.
Figure 8-157 To Combo Box
can use Windows commands to select more than one patient. To select a consecutive list of
patients, click the cursor on the first name, move the cursor to the last name, then press and
hold down the Shift+right Set key to select all the names.To select a non-consecutive list of
patients, click the cursor at the first name, move the cursor to the next name, then press and
hold down the Ctrl+right Set key, move the cursor to the next name, then press and hold down
the Ctrl+right Set key again, etc.You can also search for patients via the Search key and string.
Or, Select All Button from the Patient Menu:
Figure 8-158 Source Section
8-158 on page 107 from the Patient Menu.
Section 8-3 - Software Loading Procedure
LOGIQ™ P6/P6 P S
RO ERVICE
M
ANUAL
8 - 107