GE LOGIQ P6 Service Manual page 379

GE H
EALTHCARE
D 5245279, R
IRECTION EVISION
8-7-1-3 Removal procedure (cont'd)
11.) Unscrew 2 screws (2159625, PH M4x8 W/SP) to remove the Lower arm guide bracket. Refer to
the figure below.
12.) Unscrew 2 screws (2159626, PH M4X20) to remove the Arm stopper. Refer to the figure below.
13.) Pull out power cable & DVI cable. Make sure flexible arm not to rotate. Refer to the figure below.
3
Figure 8-241 Removing the Lower arm guide bracket
Figure 8-242 Removing the Arm stopper
Figure 8-243 Pulling out power cable & DVI cable
Section 8-7 - Mechanical Option Installation instruction
LOGIQ™ P6/P6 P S
RO ERVICE
M
ANUAL
8 - 159