GE LOGIQ P6 Service Manual page 96

GE H
EALTHCARE
D 5245279, R
IRECTION EVISION
4-3-11-2 Backup System Presets and Configurations
NOTE: Always backup any preset configurations before a software reload. This ensures that if the presets need
to be reloaded, after the software update, they will be the same ones the customer was using prior to
service.
1.) Insert a formatted CD-R or DVD-R into the drive.
2.) Press UTILITY key
3.) Select SYSTEM. on the monitor screen
4.) On the monitor display, select BACKUP/RESTORE.
5.) In the Backup list, select Patient Archive, Report Archive, System Configuration and User Defined
Configuration.
6.) In the Media field, select DVD-R.
7.) Select BACKUP.
The system performs the backup. As it proceeds, status information is displayed on the Backup/Restore
screen.
Check here to
backup presets
and configurations
4 - 16
3
Figure 4-15 Backup/Restore Menu
Section 4-3 - General Procedure
LOGIQ™ P6/P6 P S
RO ERVICE
M
ANUAL