GE LOGIQ P6 Service Manual page 387

GE H
EALTHCARE
D 5245279, R
IRECTION EVISION
8-7-1-4 Assembly procedure (cont'd)
13.) Place the cables inside the slot and connect power cable and DVI cable. Refer to the Figure below.
14.) Assemble the Cable bracket with 1 Screw (2159625, PH M4X8 W/SP)
15.) Screw 2 screws (2159634, BH M4X10 WHT) to assemble the Arm Cable Cover. Refer to the figure
below.
3
Figure 8-262 Placing the Cables
Figure 8-263 Assembling the Cable bracket
Figure 8-264 Assembling the Arm Cable Cover
Section 8-7 - Mechanical Option Installation instruction
LOGIQ™ P6/P6 P S
RO ERVICE
M
ANUAL
8 - 167