GE LOGIQ P6 Service Manual page 257

GE H
EALTHCARE
D 5245279, R
IRECTION EVISION
8-2-6-3 Removal procedure (cont'd)
3.) Unscrew 2 screws from the rear side of the keyboard. Refer to the Figure 8-72.
4.) Lift the top cover of the keyboard and disconnect 4 cables from the keyboard. Refer to the Figure
8-73.
5.) Perform the following functional tests. If all are successful, include the debrief script provided below.
Table 8-7
Service Manual
Section 4-3-1
Section 4-3-2
Section 4-7-1
Section 4-3-4
Section 4-3-5
Section 10-5-2
8-2-6-4 Mounting Procedure
Install the new parts in the reverse order of removal.
3
(1)
Figure 8-72 Unscrews 2 screws
Figure 8-73 Lifting the top cover & Disconnecting 5 Cables
Functional Tests
Section Functional Test / Diagnostic Test
Main Keyboard Assy Function Validation
System B/M-Mode Checks
System CFM and PWD Checks
Functional Checks (See Also Chapter 4)
Section 8-2 - DISASSEMBLY/RE-ASSEMBLY
Power On/Boot Up
Power Off / Shutdown
Procedure
LOGIQ™ P6/P6 P S
RO ERVICE
(2)
Debrief Script
"Service Manual, Direction
5245279, Rev 3+, Section 8-2-6. Equipment
passed all required tests and is ready for use. "
M
ANUAL
8 - 37