GE LOGIQ P6 Service Manual page 305

GE H
EALTHCARE
D 5245279, R
IRECTION EVISION
8-2-39 Air Filter Set
8-2-39-1 Tools
• No need tool
8-2-39-2 Preparations
• Shut down the system and switch off the main breaker.
8-2-39-3 Removal procedure
1.) Pull out the 2 Air filters from the bottom left and right side of the trans box. Refer to the Figure 8-127.
2.) Perform the following functional tests. If all are successful, include the debrief script provided below.
Table 8-40
Service Manual
Section 4-3-1
Section 4-3-2
Section 4-8-2
Section 10-5-5
8-2-39-4 Mounting Procedure
Install the new parts in the reverse order of removal.
3
Air filters
Figure 8-127 Air filters
Functional Tests
Section Functional Test / Diagnostic Test
Air filter set Function Validation Procedure
Section 8-2 - DISASSEMBLY/RE-ASSEMBLY
View from the foot rest
Power On/Boot Up
Power Off / Shutdown
Physical Inspection
LOGIQ™ P6/P6 P S
RO ERVICE
Debrief Script
"Service Manual, Direction
5245279, Rev 3+, Section 8-2-39. Equipment
passed all required tests and is ready for use. "
M
ANUAL
8 - 85