GE LOGIQ P6 Service Manual page 313

GE H
EALTHCARE
D 5245279, R
IRECTION EVISION
8-2-43-3 Removal procedure (cont'd)
5.) Disconnect the SATA Power Cable and SATA Cable from HDD Assy after removing 2ea cable ties.
And unscrew 4screws to remove the HDD Fixture bracket.
6.) Perform the following functional tests. If all are successful, include the debrief script provided below.
Table 8-44
Service Manual
Section 4-3-1
Section 4-3-2
8-2-43-4 Mounting Procedure
Install the new parts in the reverse order of removal.
3
Cable Ties
Figure 8-138 Separate HDD and HDD Fixture Bracket
Functional Tests
Section Functional Test / Diagnostic Test
Section 8-2 - DISASSEMBLY/RE-ASSEMBLY
Power On/Boot Up
Power Off / Shutdown
LOGIQ™ P6/P6 P S
RO ERVICE
Debrief Script
"Service Manual, Direction
5245279, Rev 3+, Section 8-2-43. Equipment
passed all required tests and is ready for use. "
M
ANUAL
8 - 93