Lenovo RackSwitch G8264 Command Reference Manual page 343

© Copyright Lenovo 2017
Table 148.
System Configuration Options (continued)
Command Syntax and Usage
system custom­dst
Configures Custom Daylight Saving Time settings. For command options, see
page 396.
Command mode: Global configuration
system date <yyyy> <mm> <dd>
Prompts the user for the system date. The date retains its value when the
switch is rebooted.
Command mode: Global configuration
[no] system daylight
Enables or disables daylight savings time in the system clock. When enabled,
the switch will add an extra hour to the system clock so that it is consistent
with the local clock.
By default, this option is disabled.
Command mode: Global configuration
[no] system default­ip {data|mgt}
Enables or disables default IP address on data interfaces and management
interfaces.
The default setting is enabled.
Command mode: Global configuration
[no] system dhcp [hostname|syslog]
Enables or disables Dynamic Host Control Protocol for setting the IP address
on interface 1. When enabled, the IP address obtained from the DHCP server
overrides the static IP address.
The default setting is enabled.
hostname enables or disables hostname option support

syslog enables or disables log server option support

Command mode: Global configuration
system idle <0‐60>
Sets the idle timeout for CLI sessions in minutes. A value of 0 disables the
system idle timeout.
The default value is 10 minutes.
Command mode: Global configuration
Chapter 4: Configuration Commands
343