Pim Interface Configuration - Lenovo RackSwitch G8264 Command Reference Manual

PIM Interface Configuration

616
G8264 Command Reference for ENOS 8.4
The following table describes the PIM Interface commands.
Table 342.
PIM Interface Configuration Options
Command Syntax and Usage
interface ip <1‐128>
Enter Interface IP mode.
Command mode: Global Configuration
[no] ip pim border­bit
Enables or disables the interface as a border router.
The default setting is disabled.
Command mode: Interface IP
ip pim cbsr­preference <0‐255>
Configures the candidate bootstrap router preference.
Command mode: Interface IP
[default|no] ip pim cbsr­preference
Resets the canditate bootstrap router preference to its default value.
Command mode: Interface IP
ip pim component­id <1‐2>
Defines the component ID for the interface.
Command mode: Interface IP
no ip pim component­id
Removes the interface from the PIM component.
Command mode: Interface IP
ip pim dr­priority <0‐4294967294>
Configures the designated router priority.
The default value is 1.
Command mode: Interface IP
[default|no] ip pim dr­priority
Resets the designated router priority to its default value of 1.
Command mode: Interface IP
[no] ip pim enable
Enables or disables PIM on the interface.
Command mode: Interface IP