© Copyright Lenovo 2017
Table 375.
OpenFlow Configuration Options (continued)
Command Syntax and Usage
maxflowmcastfdb <0‐4096>
Enables or disables the maximum flow multicast FDB option, which ensures a
dedicated maximum number of FDB multicast flows are available for the
instance. The total number of entries is shared between instances.
By default, maxflowmcastfdb is set to 0, allowing instances to
dynamically access the available FDB multicast flow slots until depletion.
Note: Setting maxflowmcastfdb manually limits the number of FDB
multicast flow slots available for other instances by the corresponding value.
Command mode: OpenFlow Instance
no maxflowmcastfdb
Sets the instance's maximum number of FDB based multicast flows to the
default value of 0 (dynamic allocation).
Command mode: OpenFlow Instance
maxflowmplspop <0‐1000>
Enables or disables the maximum flow MPLS pop option, which ensures a
dedicated maximum number of MPLS label pop flows are available for the
instance. The total number of 1000 entries is shared between instances.
By default, maxflowmplspop is set to 0, allowing instances to
dynamically access the available MPLS label pop flow slots until depletion.
Note: Setting maxflowmplspop manually limits the number of MPLS
label pop flow slots available for other instances by the corresponding value.
Note: Supported only in OpenFlow 1.3.
Command mode: OpenFlow Instance
no maxflowmplspop
Sets the instance's maximum number of MPLS label pop flows to the default
value of 0 (dynamic allocation).
Note: Supported only in OpenFlow 1.3.
Command mode: OpenFlow Instance
maxflowmplspush <0‐2000>
Enables or disables the maximum flow MPLS push option, which ensures a
dedicated maximum number of MPLS label push flows are available for the
instance. The total number of 2000 entries is shared between instances.
By default, maxflowmplspush is set to 0, allowing instances to
dynamically access the available MPLS label push flow slots until depletion.
Note: Setting maxflowmplspush manually limits the number of MPLS
label push flow slots available for other instances by the corresponding value.
Note: Supported only in OpenFlow 1.3.
Command mode: OpenFlow Instance
Chapter 4: Configuration Commands
661