Fcoe Initialization Protocol Snooping Configuration - Lenovo RackSwitch G8264 Command Reference Manual

FCoE Initialization Protocol Snooping Configuration

© Copyright Lenovo 2017
Fibre Channel over Ethernet (FCoE) transports Fibre Channel frames over an
Ethernet fabric. The CEE features and FCoE features allow you to create a lossless
Ethernet transport mechanism.
The following table describes the FCoE configuration options.
Table 356.
FCoE Configuration Options
Command Syntax and Usage
[no] fcoe fips automatic­vlan
Enables or disables automatic VLAN creation, based on response received
from the connected device.
Command mode: Global configuration
[no] fcoe fips enable
Globally enables or disables FIP Snooping.
Command mode: Global configuration
[no] fcoe fips timeout­acl
Enables or disables ACL time‐out removal. When enabled, ACLs associated
with expired FCFs and FCoE connections are removed from the system.
Command mode: Global configuration
show fcoe information
Displays the current FCoE parameters.
Command mode: All
Chapter 4: Configuration Commands
631