© Copyright Lenovo 2017
Table 179.
Port Configuration Options (continued)
Command Syntax and Usage
[no] tagskipegress
Enables or disables egress VLAN tag enforcement to be skipped.
Note: STP must be globally disabled on the switch and all VLANs must be
assigned to the default STG.
Command mode: Interface port/Interface portchannel
[no] tagskipingress
Enables or disables ingress VLAN tag enforcement to be skipped.
Command mode: Interface port/Interface portchannel
[no] vlan dot1q tag native
Disables or enables VLAN tag persistence. When disabled, the VLAN tag is
removed at egress from packets whose VLAN tag matches the port
PVID/Native‐vlan.
The default setting is disabled.
Note: In global configuration mode, this is an operational command used to
set the VLAN tag persistence on all ports currently tagged at the moment of
execution. VLAN tag persistence will not be set automatically for ports tagged
afterwords. Also, as an operational command, it will not be dumped into the
configuration file.
Command mode: Global configuration/Interface port/Interface portchannel
show interface port <port alias or number>
Displays the specified port's parameters.
Command mode: All
Chapter 4: Configuration Commands
405