IP Access List Configuration
526
G8264 Command Reference for ENOS 8.4
Use the following commands to configure an access list statement on the current
route‐map.
Note: The access list number (1‐32) represents the IP access list you wish to
configure.
Table 274.
IP Access List Configuration Options
Command Syntax and Usage
accesslist <1‐32> action {permit|deny}
Permits or denies action for the access list.
Command mode: Route map
[no] accesslist <1‐32> enable
Enables or disables the access list.
Command mode: Route map
[no] accesslist <1‐32> matchaccesscontrol <1‐640>
Sets the network filter number.
Command mode: Route map
[no] accesslist <1‐32> matchaddress <1‐256>
Sets the network filter number. See "Network Filter Configuration" on
page
522 for details.
Command mode: Route map
accesslist <1‐32> metric <1‐4294967294>
Sets the metric value in the AS‐External (ASE) LSA.
Command mode: Route map
no accesslist <1‐32> metric
Removes the current metric value for the specified access list.
Command mode: Route map
no accesslist <1‐32>
Deletes the access list.
Command mode: Route map
show routemap <1‐255> accesslist <1‐32>
Displays the current Access List configuration.
Command mode: All