ACL Group Configuration
© Copyright Lenovo 2017
These commands allow you to compile one or more ACLs into an ACL group.
Once you create an ACL group, you can assign the ACL group to one or more
ports.
Table 215.
ACL Group Configuration Commands
Command Syntax and Usage
[no] accesscontrol group <1‐256> list <1‐256>
Adds or removes the selected IPv4 ACL to the ACL group.
Command mode: Global configuration
[no] accesscontrol group <1‐256> list6 <1‐128>
Adds or removes the selected IPv6 ACL to the ACL group.
Command mode: Global configuration
show accesscontrol group <1‐256>
Displays the current ACL group parameters.
Command mode: All
Chapter 4: Configuration Commands
443