IPv6 Neighbor Discovery Configuration
© Copyright Lenovo 2017
The following table describes the IPv6 Neighbor Discovery configuration
commands.
Table 263.
IPv6 Neighbor Discovery Configuration Options
Command Syntax and Usage
[no] ipv6 nd advmtu
Enables or disables the MTU option in Router Advertisements.
The default setting is enabled.
Command mode: Interface IP
ipv6 nd dadattempts <1‐10>
Configures the maximum number of duplicate address detection attempts.
The default value is 1.
Command mode: Interface IP
no ipv6 nd dadattempts
Resets the maximum number of duplicate address detection attempts to the
default value of 1.
Command mode: Interface IP
ipv6 nd hopslimit <0‐255>
Configures the Router Advertisement hop limit.
The default value is 64 hops.
Command mode: Interface IP
no ipv6 nd hopslimit
Resets the IPv6 Router Advertisement hop limit to its default value of 64 hops.
Command mode: Interface IP
[no] ipv6 nd managedconfig
Enables or disables the managed address configuration flag of the interface.
When enabled, the host IP address can be set automatically through DHCP.
The default setting is disabled.
Command mode: Interface IP
[no] ipv6 nd otherconfig
Enables or disables the other stateful configuration flag, which allows the
interface to use DHCP for other stateful configuration.
The default setting is disabled.
Command mode: Interface IP
Chapter 4: Configuration Commands
511